By default eth0 is mandatory and is connected to Internet. Vyatta boots up with DHCP for eth0 and creates a default Internet gateway via eth0.
Additional network interfaces are enabled by default, but are not configured. It is recommended to manually configure its IP address that match AWS assigned IP address (see the AWS console).
For example, to configure eth1 to 10.1.3.144 with mask 255.255.255.0, we would enter configure mode, and type
Code: Select all
set interfaces ethernet eth1 address 10.1.3.144/24
commit
save
The HVM version update we also fixed a bug which now take full 2GB as the root volume.
Please let us know what you think. We'd love to hear from you!